| Type: | Chicks Hatching Machine |
|---|---|
| Usage: | Incubation Equipment |
| Application: | Chicken |
| Power Source: | Electric |
| Heating and Ventilation Equipment Type: | Steam or Hot Water Heating |
| Computerized: | Computerized |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Features
1). High economic benefit: use electricity as the main heat source, coal as the assisstant, including honeycomb briquette,eggette,coal cake,charcoal,liquefied gas,etc.
Also it can keep homoiothermal by replacing the hot water;the incubator breed on top, hatcher below
2). Power on/cut: automatic control with power on; manual supervisory control with power cut.It can operate after power cut for a certain time;
3). Dual warming tube & humidification tube; dual on-off control for warming & humidification;
4). Two-heating pipe, two-wetting, double switch control heating and humidifying system.
5). Saving Electricity: 50% saved compared with old incubator;
Product Description
| Main Technical Factors: | ||
| No | item | Content |
| 1 | Range of temperature display | 0~99ºC |
| 2 | Precision of temperature measurement | ±0.1ºC. |
| 3 | Range of humidity display . | 5-99%RH |
| 4 | Precision of humidity control | ±3%RH. |
| 5 | Outputs | 6 Road (the main heating, auxiliary heating, ventilation (ventilation), left turn, right turn, humidification) |
| 6 | Output current | main and auxiliary heating 20A, other output is 5A. |
| 7 | Number of turns | maximum 999 times. |
| 8 | Egg turning cycle | 0~999 minutes (Default is 90 minutes) . |
| 9 | Egg turning time | 0~999 seconds(Default is 180 seconds) |
| 10 | Ventilation cycle | 0 - 999 minutes(default is 120 minutes) |
| 11 | Breathing time | 0 - 999 seconds(default is 15 seconds) |
| 12 | Temperature and humidity length | about 1.5 meters |
Detailed Images
Operation Tips
a. SettingTemperature
The incubator temperature is set at 38°C(100°F) before shipment. User can adjust temperature according to the egg category and local
climate. If the incubator can't reach 38°C(100°F) after working for several hours, please check: (1) the setting temperature is above
38°C(100°F) (2) the fan is not broken (3) the cover is closed (4) the room temperature is above 18°C(64.4°F).
1. Press button "Set"once.
2. Pressbutton"+"or"-"tosetrequiredtemperature.
3. Pressbutton"Set"toexitsettingprocess.
a1. Setting Temperature Alarm Value (AL & AH)
The alarm value for high and low temperature is set at 1°C(33.8°F) before shipment.
For low temperature alarm(AL):
1. Press button "SET" for 3seconds.
2. Pressbutton"+"or"-"until"AL"isillustratedonthetemperaturedisplay.
3. Press button"Set".
4. Pressbutton"+"or"-"tosetrequiredtemperaturealarmvalue.
For high temperature alarm(AH):
1. Press button "Set" for 3seconds.
2. Pressbutton"+"or"-"until"AH"isillustratedonthetemperaturedisplay.
3. Press button"Set".
4. Pressbutton"+"or"-"tosetrequiredtemperaturealarmvalue.
a2. Setting Upper & Lower Temperature Limits (HS & LS)
For example, if the upper limit is set at 38.2°C(100.8°F) while lower limit is set at 37.4°C(99.3°F), the incubator temperature can only be
adjusted within this range.
b. LowHumidity Alarm (AS)
The humidity is set at 60% before shipment. User can adjust low humidity alarm according to the egg category and local climate.
1. Press button "Set" for 3seconds.
2. Pressbutton"+"or"-"until"AS"isillustratedonthetemperaturedisplay.
3. Press button"Set".
4. Pressbutton"+"or"-"tosetlowhumidity alarmvalue.
The product will make alarm calls at low temperature or humidity. Re-set the temperature or add water will solve this problem.
c. Calibrating the TemperatureTransmitter(CA)
The thermometer is set at 0°C(32°F) before shipment. If it illustrates a wrong value, you should put a calibrated thermometer into the
incubator and watch for the temperature differentials between calibrated thermometer and controller.
1. Calibrate the the transmitterdimension.(CA)
2. Press button "Set" for 3seconds.
3. Pressbutton"+"or"-"until"CA"isillustratedonthetemperature display.
4. Press button"Set".
5. Pressbutton"+"or"-"tosetrequireddimension.
Machine Test Before Hatching
1. Check the incubator motor is connected to the controller.
2. Plug in the powercord.
3. Turn on the switch on the panel of the unit.
4. Temperature and humidity of this unit won't reach the setting value when you newly plug in the power cord, and this unit will
send out alarm so flow temperature and low humidity.
5. Cancel the alarm by pressing any button.
6. Unpack the incubator and fill the water channel will help to increase humidity gradually.(Warm water is preferred.)
7. The interval for automatic egg turning is set at every 2 hours. Please pay close attention on egg turning at first use.
The eggs are gently rolled right and left by 45 degrees for 10 seconds and the natrandom directions.Do not put on the cover for observation.
Our TeamCompany Certificate
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}